Polishing Powder Compact Sieve
Compact sieve designed for removal of foreign materials in space-limited installations. In the case of the hopper type, the screened materials are discharged directly beneath the equipment.

SEND INQUIRY

Product Details

Compact Sieve
Separates at high rates in low-headroom areas

Compact sieve designed for removal of foreign materials in space-limited installations. In the case of the hopper type, the screened materials are discharged directly beneath the equipment. Therefore, treatment in large volumes is possible. On-the-floor installation and hinged types are available.

Compact sieve employ two imbalanced-weight gyratory motors mounted on the exterior of the unit (instead of one motor positioned beneath the screening chamber),reducing minimum height requirements significantly. This enables the bottom outlet to be located directly below the top inlet, allowing material to fall vertically through the screen at high rates. Available in diameters from 600 to 1200mm. the external location of gyratory motors also makes compact models suitable for high temperatureapplications.

Polishing Powder Compact Sieve

Features:

● Simple direct-discharge type
A direct-discharge type does not effect excess movement to the material being proceed, so no need extra facilities.

● Space saving design
The installation Space is small, so this unit can be installed between existing machines. The height is also low.

● Simple structure
Thestructure is extremely simple realizing a low-fault, low-noise.

● Simple maintenance
As the motor is installed on the side, attachment and detachment of the motor is very easily.


· Good screening efficiency, extremely fast center discharge of fine particles, adjustable retention time for oversize particles.

· Up to 3 fractions simultaneously on each machine.

· High acceleration; also suitable for solid-liquid separation and wet products

· 100% dust and waterproof thanks to U-shaped EPDM or Silicone gaskets on the screen frames.

· Up to 100% availability in 24hr operation; maintenance-free motor

· Optimum set-up of the vibrating springs, minimal transfer of vibrations

· Low noise level of approximately 75 db(A)

· Screen frames with double clamping ring for fast self-changing

· Size range 600 - 1500 mm diameter

· Screens down to 100μLouis Vuitton's Bag Louis Vuitton's Bag Louis Vuitton's Bag Louis Vuitton's Bag Louis Vuitton's Bag Louis.

Polishing Powder Compact Sieve Manufacturer


Polishing Powder Compact Sieve Suppliers


Parameter

Item

Type

Dimensions (mm)

Effective mesh areaMotorWeight

D

W

Di

D

Do

H

M2

kw

kg

NCS24










NCS32










NCS40










NCS48











Bag dumping Screener
Scalps bulk material while collecting dust

Circular vibratory Bag Dump Screener scalp bag scraps and other oversize materials from manually dumped bulk materials while protecting the operator and plant environment against dust contamination. Ambient air and dust from dumping activities is drawn through dual cartridge filters that derive vacuum from ta top-mounted exhaust fan. Dust accumulated on the filter’s exterior surfaces is dislodged by pulse jet nozzles that alternately release short blasts of air on the timed cycle. Available in 600,800, 1000, 1200mm diameters, to 3-A,FDA and other standards.


Features:

● For chemical, pharmaceutical,food industries;­

● Dust removal function

● Vibrating screen,effectively remove the foreign material;

● Equipment adopts intelligent control

● No dead Angle inside the equipment

● Conforms to GMP requirements


Send